Blog
Category: Robotics
Bring your idea to life in no time. The prototyping solution for all your needs. For UX designers, entrepreneurs, product managers, marketers, and anyone with a great idea.
-
How big are industrial robots?
Robots size may vary a lot. The smallest industrial robot has a size of A4 piece of paper, the biggest one has almost five meters of reach. The video below shows very well a wide variety of sizes. You have to remember that even a small robot can have a large working workspace thanks to […]
-
KUKA.Sim Pro and KUKA Xpert free for 90 days
We have an opportunity to test and learn another software, this time provided by KUKA. KUKA.Sim Pro is now available for 90 days without restrictions. There is a second bonus which should be also very interesting to many of you.
-
Another Free Process Simulate Training
I wrote recently about the free training provided by Siemens. If you want to try something different there is an alternative offered by Mentor for the period of the COVID-19 impact.
-
ABB Robotstudio – video tutorials
The video tutorials prepared by ABB to learn how to use RobotStudio are a bit chaotic. At the University of Skövde they had a similar feeling, but instead of complaining they made their own materials.
-
407 free ebooks from Springer Publishing (robotics included 🤖)
Because of COVID-19 we already received free licences for various robotics software and free courses that teach how to use them. What about books? Don’t worry, now they are also available for free 🙂 Springer is one of the best-known publishers of scientific journals and books. Their publications are expensive, but at this difficult time, […]
-
NX, Tecnomatix, Simcenter – free online training directly from Siemens
Have you finished the courses of Yaskawa and ABB robots programming? 🙂 Today I have something even more interesting for you: free access to Siemens commercial courses. On certified materials you can learn how to use programs such as NX, Process Simulate, RobotExpert and many others.
-
Yaskawa MotoSim VRC2019 SP3 – free license for 90 days
Another robot manufacturer decided to make his simulation program available for free during a COVID-19 pandemic. Yaskawa MotoSim VRC2019 SP3 is available for (almost) everyone for 90 days.
-
ABB RobotStudio – free license until end of 2020!
The halted production and restriction of free transport between EU countries are just some of the problems caused by the COVID-19 pandemic. It’s hard to predict what the future will look like, but we’re currently at a temporary standstill. Most of us spend much more time at home than usual. This is a good time […]
-
Robot safety fence – Impact test
Most of the industrial robots sold today are still conventional ones that require proper protection. Are you curious how much can resist a safety fence? Look at this short video below ⬇️
-
Metal sheets forming with robots
In my book I wrote about Ford Freeform Fabrication Technology (F3T) solution. Ford uses it for rapid prototyping in sheet metal. It is a fast and cost-effective way for the production of single elements of the car body for future models.